Thread the shower head
clockwise onto the shower arm.
10
1
Remove the mud guard.
Carefully slide the escutcheon onto
the valve.
2
Place handle assembly on valve
and rotate clockwise to secure
escutcheon.
Re-install the trimmed stem and
nipple on the valve.
Carefully slide the escutcheon onto
the valve and place handle assembly
on valve and rotate clockwise to
secure escutcheon.
9
If handle assembly will not secure
escutcheon to the wall, measure and
note the distance ‘XX’(the distance
between the bottom of the handle
assembly and the escutcheon)
Unscrew the handle assembly
anti-clockwise from valve and
remove the escutcheon.
5
6
Cut stem and nipple the amount
noted in step # 4. (Never cut the
stem and nipple while still on the
valve. This may damage the valve.)
Apply teflon tape to the shower arm
and thread clockwise onto the
nipple. Then slide the flange down.
4
b
}
7
a
8
b
Thread Teflon Tape
3
a
Revised 01-2019
Revised 01-2019
Installation completed.
11
MFF-CHAS-CP
MFF-CHAS-BN
MFF-CHAS-ORB
MFF-CHAS-MB
Installation/Installation/Instalación
