FONESTAR WA-2152B, Instruction Manual

Page: 5 / 8

CONNECTION
- Make the connections with the amplifier and all the components of the installation switched off and
disconnected from the power supply.
- It is possible to connect different sources to the AUX inputs on the front panel and the MIC or INPUT on
the rear panel of the amplifier.
- The amplifier is low impedance, therefore the speakers must be connected in a series/parallel circuit so
that the impedance load of the speakers is the same as the speaker output impedance and that the power
supplied by the amplifier does not exceed that withstood by the speakers:
15 + 15 W RMS at 4 Ω
- Connect the amplifier mod. WA-2152B to the power supply.
- Once the connections have been made according to your needs, connect the devices to the power supply
and switch them on. After use, do not forget to switch the device off and disconnect it from the power
supply.
TECHNICAL SPECIFICATIONS
WA-2152B
CHARACTERISTICS Bluetooth stereo amplifier
Plays music from smartphones, tablets and other bluetooth
devices
Class D amplification circuit
Aluminium case for surface assembly
POWER 15 + 15 W RMS a 4 Ω
PROTECTION Short circuit, temperature and surge
RESPONSE 20-20.000 Hz
DISTORSIÓN Harmonic: 0.4% at 1 kHz
ENTRADAS 1 dynamic mic., 6.3 mm mono jack
1 aux, 2 x RCA
1 aux, 3.5 mm stereo jack
SALIDAS Loudspeakers 4-8 Ω, spring terminals
INDICADORES LED pairing indicator
ALIMENTACIÓN 12 V DC, 2 A with adapter included
MEDIDAS 152 x 41 x 114 mm depth
- 5 -
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Página 5