CONNECTION
- Make the connections with the amplifier and all the components from the audio system switched off and
disconnected from the mains.
- Connect the audio source to the AUX input.
- If you want, connect a microphone to the MIC input prepared for it.
- The remote control model MC-2150 can be connected to the REMOTE output using Cat 5e cable.
- Check that the general volume control is at its minimum.
- Connect the loudspeakers to the low impedance outputs in a series/parallel circuit so that the loudspeaker
charge impedance is the same as the output impedance from the amplifier and the power supplied by the
amplifier does not exceed what is withstood by the loudspeakers.
- Once the connections have been made according to your needs, connect the equipment to the mains and
switch them on. After use, do not forget to disconnect the equipment from the mains.
SPECIFICATIONS
- 5 -
EN
WA-2150
CHARACTERISTICS
Compact Class D stereo amplifier.
Steel case for surface assembly.
Remote control output for power and volume adjustment.
Stereo speaker output.
POWER
2 x 15 W RMS at 4 Ω
PROTECTION
Short-circuit and temperature
RESPONSE
20-20 000 Hz
DISTORTION
Harmonic: 0.06% at 1 kHz
INPUTS
1 dynamic mic., 6.3 mm mono jack
1 auxiliary line, 3.5 mm stereo jack
OUTPUTS
4-8 Ω speakers, Euroblock
1 remote control, RJ-45
CONTROLS
General volume
Input signal selector: mic. or line
Volume control selector: local or remote
INDICATORS
LED power indicator
POWER SUPPLY
12 V DC, 2 A with adapter included
DIMENSIONS
115 x 31 x 98 mm depth
OPTIONAL
Remote control mod.
MC-2150
