EN
- 4 -
STEREO MODE
Place the selector located on the rear part of the power amplifier in the STE position.
In this mode, the two channels operate independently. Connect the two loudspeaker inputs and two outputs.
The channel volume is adjusted separately.
INPUTS
CH B
CH A
CH B
CH A
BRIDGE
8 Ω ONLY
GND LIFT
STE
BRI
PAR
CH B
CH A
OUTPUTS
(1+, 1-)
(1+, 1-) CH A OUT
STEREO POWER AMP.
150 + 150 W RMS, 4 Ω
100 + 100 W RMS, 8 Ω
200 W RMS BRIDGE 8 Ω
SA-204
~115 V AC, 50/60 Hz FUSE: 6.3 A
~230 V AC, 50/60 Hz FUSE: 3.15 A
POWER CONSUMPTION: 700 W
AC SELECT
(1+,2-) BRIDGE
8 Ω ONLY
R
L
R
L
STE
PAR
BRI
-
+
+
-
150 + 150 W RMS@4 Ω
100 + 100 W RMS@8 Ω
BRIDGE MODE
Place the selector located on the rear part of the power amplifier in the BRI position.
In this mode, the input of the two channels will be the channel A input signal. The two power amplifier
channels are connected internally so that their power is combined in one single output. Connect the channel
A input and the loudspeaker BRI output. The volume is adjusted with the CH A control.
INPUTS
CH B
CH A
CH B
CH A
BRIDGE
8 Ω ONLY
GND LIFT
STE
BRI
PAR
CH B
CH A
OUTPUTS
(1+, 1-)
(1+, 1-) CH A OUT
STEREO POWER AMP.
150 + 150 W RMS, 4 Ω
100 + 100 W RMS, 8 Ω
200 W RMS BRIDGE 8 Ω
SA-204
~115 V AC, 50/60 Hz FUSE: 6.3 A
~230 V AC, 50/60 Hz FUSE: 3.15 A
POWER CONSUMPTION: 700 W
AC SELECT
(1+,2-) BRIDGE
8 Ω ONLY
STE
PAR
BRI
-
+
+
-
200 W RMS@8 Ω
