BELT-PACK MICROPHONE (mod.
MSH-814
)
1.-
Wireless belt-pack transmitter on/off switch. Furthermore, this selector has a third MUTE position to
silence the audio output with the microphone switched on.
2.-
MIC IN
: 3.5 mm stereo mono jack connector for microphone connection.
3.-
LED indicator, it lights up red for a few moments and then switches off if the batteries have a good level
of charge. If on the other hand, the batteries have a low level of charge, the LED indicator remains
permanently lit in red.
4.-
Aerial.
5.-
Transmission channel selectors. Place them in the same position both on the transmitter and on the
receiver for correct audio transmission. For more information, consult the INSTRUCTIONS FOR USE
section.
6.-
GAIN
: audio input sensitivity adjustment.
7.-
Battery compartment
: uses two 1.5 V batteries type LR6-AA, preferably alkaline. When inserting the
batteries make sure that the polarity is correct.
HAND-HELD MICROPHONE (mod.
MSH-816
)
1.-
Grille
: protects the microphone capsule and helps to reduce breathing and wind noises.
2.-
BATT
: LED power and low battery indicator. When the battery charge is optimum, the LED indicator
remains lit. When the battery charge is low, the LED indicator remains lit with less intensity. Replace the
batteries with new ones.
3.-
Hand-held microphone on/off switch. Furthermore, this selector has a third MUTE position to silence the
audio output with the microphone switched on.
EN
- 5 -
MSH-814_MSH-816_MANUAL_(EN)_20180219_Maquetación 1 19/2/18 8:53 Página 5