CONNECTION AND OPERATION
Select the operation mode by pressing the MODE buttons. To make changes within a mode use the SET
buttons and press ENTER to confirm.
The following table shows you all the operating modes and the possible settings for each mode.
DMX CONTROL
To control the device using a DMX controller:
-
Select the desired DMX operation mode: 13 or 18 channels as shown in the table above. Use the MODE
and SET button to select the number of channels and press ENTER to confirm the setting.
-
Select the DMX address to control this LED bar with a value between 1 and 512. Use the MODE and SET
button to select the DMX address and press ENTER to confirm the setting.
-
Below are the features of each channel in the different DMX operating modes:
MODE 1 MODE 2
VALUE
FUNCTION
DMX CONTROL
Addr
-
A001 - A512
Address for DMX control
AUTOMATIC
MODES
sLnd
-
Auto
Set automatic mode (ON)
-
Soun
Set sound activation mode (ON)
DMX CONTROL
SEt
Chnd
18CH
Mode 18 DMX control channels
13CH
Mode 13 DMX control channels
AUTOMATIC
MODE SETTINGS
Shnd
SH 0
Effect 1. (Automatic mode ON)
SH 1
Effect 2. (Automatic mode ON)
SH 2
Effect 3. (Automatic mode ON)
SH 3
Effect 4. (Automatic mode ON)
SenS
00-99
Microphone sensitivity (Sound Activation Mode ON)
(00: microphone OFF, 01: low sensitivity, 99: high sensitivity)
GENERAL
SETTINGS
rPAn
YES
Reverse horizontal rotation - PAN
no
Normal horizontal rotation - PAN
rTiL
YES
Reverse vertical rotation - TIL
no
Normal vertical rotation - TIL
LEd
OFF
Display turns off after 5 seconds
on
Display always on
dISP
YES
Information on the normal display
no
Inverts the information on the screen
Load
YES
Activate StandBy mode
no
No effect
RESTORE
REST
-
-
Perform a check of the device
- 3 -
EN
MOV-6060L_MANUAL_(EN_ES_FR_PT)_20200130.qxp_Maquetación 1 30/1/20 14:57 Página 3
