background image

DESCRIPTION

- Audio mixer/splitter.

- 1 main input channel, 1 main output channel and 6 canals that can be set as inputs or outputs.

CONTROLS AND FUNCTIONS

FRONT PANEL 

1.-

INPUT LEVEL

: LED main input signal level indicators.

2.-

SPLITTER MAIN INPUT LEVEL

: main input volume control when operating as splitter.

3.-

MAIN LINK

: button for guiding the MAIN IN input to the MAIN OUT output. Press this button to hear

the MAIN IN input through the MAIN OUT output.

4.-

OUTPUT LEVEL

: LED main output signal level indicators.

5.-

MIXER MAIN OUTPUT LEVEL

: main output volume control when operating as a mixer.

6.-

IN/OUT LEVEL CH 1-CH 6

: LED indicators for input/output level (depending on the operating mode)

for each one of the channels CH 1 to CH 6.

7.-

LEVEL

: volume control for each one of the channels CH 1 to CH 6.

8.-

SPLITTER/MIXER

: button for selecting the operating mode for each one of the channels CH 1 to CH

6 as splitter or mixer.
In SPLITTER mode the channel will operate as an output and the input signal will be the MAIN IN input.
In MIXER mode the channel will operate as an input and the mix of the selected channels will be in the
MAIN OUT output as MIXER.

9.-

BAL/PAN

: balance control. Sends the signal to the left (L) or right (R) channel of the stereo image of each

of the channels CH 1 to CH 6.

10.-

POWER

: on/off power switch.

BACK PANEL 

1.-

AC socket

: for connecting AC power supply cable.

2.-

OUTPUT

: balanced output line level for channels CH 5 and CH 6, 6.3 mm stereo jack connector.

3.-

INPUT

: balanced input line level for channels CH 5 and CH 6, 6.3 mm stereo jack connector.

4.-

OUTPUT

: balanced output line level for channels CH 1 to CH 4, XLR connector.

5.-

INPUT

: balanced input line level for channels CH 1 to CH 4, XLR connector.

6.-

MAIN OUT

: balanced output line level, 2 x XLR connectors. Use this output as the main output when

the equipment is operating as a mixer.

7.-

MAIN IN

: balanced input line level, 2 x XLR connectors. Use this input as the main input when the

equipment is operating as a splitter.

- 4 -

EN

Summary of Contents for MD-802









Reviews: