Note
: when the amplifier is used with 24 V DC, the power is reduced approximately 20%.
12.-
OUTPUT:
output for speakers. For connecting loudspeakers in low impedance 4 Ω and 100/70/25 V high
impedance lines. Connect the loudspeaker line between the COM terminal and the impedance or line
V desired.
13.-
LEVEL/MOH:
volume control from the monitor output. Turning the control wheel clockwise, the volume
increases and in the other direction, decreases.
14.-
Output terminals for auxiliary loudspeaker 1 W 8 Ω - 600 Ω (Monitor):
output terminals for connecting
an external speaker as a monitor. It has an internal 1 W amplifier. It only monitors the AUX IN input,
controlled by the AUX volume, and adjustable level using the LEVEL/MOH control on the back panel.
15.-
TEL. INPUT:
telephone input terminals. For connecting to a telephone switchboard and for paging from
the switchboad with priority over the rest of the inputs. See the switchboard characteristics to adjust it
to the amplifier input level. The signal level can be adjusted using the TEL. LEVEL control on the back
panel.
Note
: the amplifier is supplied with the priority cancelled. To activate this function you have to turn the
MUTE/SEN control wheel clockwise, to its maximum (maximum priority).
16.-
TEL. LEVEL:
TEL. INPUT volume control. For adjusting the volume in the telephone switchboard that
is connected to the TEL. INPUT terminals. By turning the control wheel clockwise, you raise the volume
and in the other direction, you lower it.
- 7 -
EN
