FONESTAR MA-30, Instruction Manual

Page: 5 / 12

7.- SD/MMC card reader: connection port for SD/MMC memory cards.
8.- REC (Memory): Button for recording from the AUX/PHONO, MIC 1 and MIC 2 inputs. Follow the steps
below to record:
- Connect a USB device or SD card and press the REC button to start recording.
- REC will appear on the display..
- Press the SD/USB button to select the storage device to record on: the SD memory card or the
USB storage device..
- Select the desired recording level using the REC LEVEL control.
- Press the REC button again. Once the word REC has flashed 3-4 times on the display, the
recording will start.
- Do not try to use the equipment while it is recording.
- Press the
3
button to finish recording.
Note: the recording is saved in a file with the name FrE (with successive numbers) in the FrE folder
created. If the display shows the word Err during the recording, there has been an error. In this
case, press the
3
button to stop the recording.
9.- 12 : To start and pause playback.
10.- REPEAT: press the RPT button to select one of the following 4 repeat modes:
- Repeat deactivated (nothing appears on the information display).
- Repeat once (REP 1). To repeat the audio track selected at that moment.
- Repeat all (REP ALL). To repeat all the audio tracks contained on the SD card or USB storage
device.
- Random (REP). To repeat all the audio tracks contained on the SD card or USB storage device
randomly.
11.- SD/USB: For selecting the audio source from between an SD card or a USB storage device.
12.-
q
/
3
: On/off push button for the USB/SD/MP3 recorder/player and pause in playback. Press this
button for 3 seconds to switch the equipment on or off.
2.- MIC 1: Volume control for microphone 1.
3.- MIC 2: Volume control for microphone 2.
4.- AUX/PHONO: AUX/PHONO input volume control..
5.- MASTER: Control for regulating the master output volume for all inputs.
6.- Amplifier operating LED indicator.
7.- Microphone 1 input, 6.3 mm mono jack connector.
8.- Microphone 2 input, 6.3 mm mono jack connector.
9.- BASS: To strengthen or weaken the bass frequencies ± 10 dB.
10.- TREBLE: To strengthen or weaken the treble frequencies ± 10 dB.
11.- POWER: Amplifier on/off switch.
- 5 -
EN
MA-30, MA-30RGU_Manual_(EN)_20180209_Maquetación 1 9/2/18 9:02 Página 5