5, 12.-
VOL +, VOL -:
CD/USB/MP3 player volume control.
6.-
EJECT:
to eject the CD from the system.
7.-
USB port:
for connecting USB devices with MP3 files.
8.-
Information display:
to show the stage of playback, the number of the song being played at the
time and the number of the folder that it belongs to. Besides, it shows the type of device
connected (USB or CD), as well as the moment and mode of playback.
9.-
12
: to start and pause playback.
10.-
CD/USB
: a button which lets you select between the audio sources available for playback: USB
storage device or CD.
11.-
Playback mode
: by pressing this button you change between the different playback modes.
Press it repeatedly to select the playback mode you want from those available: normal playback
of the files in order (nothing is shown on the display), repeat a file (REP), repeat everything (ALL),
and random playback of the files (RANDOM).
13.-
q
:
switches the player on and off.
BACK PANEL
1.-
AC socket:
to connect the AC power supply cable.
2.-
GND
: screw to earth the system. To be used when the mains does not have and earth incorporated.
3.
DC 12 V
: 12 V DC power supply terminals. For the amplifier to work with a 12 V DC power supply,
batteries, emergency power supply system, etc. Make the connection with 2.5 mm² cross-section cable
to the – negative and + positive terminals.
4.
OUTPUT
: speaker output. For low impedance (4, 8 and 16 Ω) speaker connections and high impedance
100 V line. Connect the speaker line between the COM terminal and the impedance or desired V line.
5.
AMP IN/PRE OUT
: the connection bridge between the 2 RCA connectors communicates the output
signal of the PRE OUT with the AMP IN input.
6.
AUX/PHONO
: auxiliary input for the signal source which allows connection through RCA connectors
from auxiliary or phono audio sources.
7.
AUX/PHONO selector
: to choose between auxiliary and phono input.
- 5 -
EN
MA-18CDU_Manual_(EN)_20171212_Maquetación 1 13/12/17 16:03 Página 5
