CONNECTION
- Before connecting the subwoofer to the power supply, make sure that the controls are at their minimum
and that the POWER switch is switched off.
- Connect a line level signal of an external audio source (MP3 player, CD player, mixer, computer, etc.)
to the SUBWOOFER input. Use the XLR connector or the 6.3 mm jack connector.
- Thanks to the line level output, it is possible to position an active loudspeaker for mid-trebles in cascade
with the autoamplified subwoofer. Connect the subwoofer OUTPUT to the input of the loudspeakers.
- Connect the devices to the 230/115 V AC power supply.
- Switch on the autoamplified subwoofer using the POWER switch.
- The value of the frequency of the low pass filter can be varied using the knob located on the rear panel of
the subwoofer.
- When the device is not being used, switch it off using the POWER switch and disconnect it from the mains
supply.
- 5 -
EN
FPRO-SUB35015A_MANUAL_(EN)_20170919_Maquetación 1 19/9/17 12:01 Página 5
