RECEIVERS
1.-
EQ
: equalization auto setting. Adjusts the signal to the length of Cat 6 cable being used. It is possible
to adjust the signal to the length of Cat 6 cable being used manually. To do so, press the LENGTH
button 3 times (the first two presses correspond to automatic setting). There are 10 equalization levels,
with each press advancing 1 level until it returns to automatic equalization.
2.-
CAT. 6
: input to connect to the splitter output, RJ-45 connector. Use a length of Cat 6 cable that does
not exceed 40 metres.
3.-
SIGNAL
: LED connection indicator. It remains lit when the signal transmission is stable. The light flashes
when the signal is not stable.
4.-
5 V DC
: power supply input.
5.-
OUTPUT
: signal output, HDMI connector.
6.-
IR IN
: remote control receiver connection input.
CONNECTION AND OPERATING
- Connect the signal source to the splitter INPUT using HDMI cable.
- Then, connect the receivers required to the splitter OUTPUT using Cat 6 cable with a length of Cat 6 cable
that does not exceed 40 metres.
- Connect the receivers’ output to the TV moniors mediante cable HDMI.
- Connect the transmitter to the power supply using the mains adapter provided.
NOTE:
it is recommended that good quality Cat 6 cables with FTP/SFTP shielding are used. The cables
must have shielded connectors with the cable shielding connected to the connector shielding.
This improves the reliablity of the HDMI extenders, avoiding ground loops produced by
interconnecting devices (player/receiver and TV) with different ground reference which could cause
losses or image cutting.
FULL HD
MONITOR TV
FO-15CAT8E
FULL HD
MONITOR TV
FULL HD
MONITOR TV
FULL HD
MONITOR TV
FULL HD
MONITOR TV
FULL HD
MONITOR TV
FULL HD
MONITOR TV
FULL HD
MONITOR TV
FULL HD
MONITOR TV
HD DVD/BLU-RAY
HDMI
HDMI
EN
- 5 -
FO-15CAT8E_MANUAL_(EN)_20180705_Maquetación 1 5/7/18 12:55 Página 5
