EN
- 6 -
USB/SD/MP3 RECORDER/PLAYER (MOD. FAP-12GU)
USB/SD/MP3 player
The equipment can reproduce MP3 files contained in a USB storage device or in an SD memory card. Follow
the steps below:
- Connect a USB storage device to the USB port of the equipment or insert an SD card in the corresponding
slot.
- To turn the player on, give one long press to the
q
/
12
button.
- Select the desired audio source, pressing the SD/USB button to choose between the SD card and the USB
storage device.
- If the screen shows
it means that no USB device or SD card is connected. Connect one of the two to continue playing.
- If the screen shows
it shows that the equipment is searching for audio tracks in the chosen storage device. The reproduction
will start and the following will appear on the screen
- Press
7
/
8
to choose the previous or following audio track. With the
button you can choose between
the different reproduction types: random playing, repeat all the audio tracks, repeat a specific audio track
or repetition deactivated.
- The volume can be turned up or down with the (+,-) control
- To stop playing press
q
/
12
, the screen will show
- To stop the player, press the
q
/
12
button for a few seconds.
Note
: If the screen shows
you need to charge the rechargeable batteries, by connecting the mains adapter to the equipment and a
power supply source or replacing the alkaline batteries.
USB/SD/MP3 recording
With the personal amplification system mod.
FAP-12GU
an audio fragment can be recorded in a USB storage
device or an SD memory card.
Follow the steps below:
- Switch the player on by pressing the
q
/
12
button for a few seconds.
- Press the REC button for a few seconds, the screen should show
- Press the SD/USB button to choose which memory device the recording will be stored in: the SD
memory card or the USB storage device.
- Press the REC button again. The word REC will blink 3 times on the screen and the recording will begin.
The screen will show the duration of the recordings.
