FONESTAR BAR-73L, Instruction Manual

Page: 6 / 28

EN
- 6 -
24 channels (P):
CHANNEL VALUE FUNCTION
CH1 000-255
leds 1 to 3
Red intensity
CH2 000-255 Green intensity
CH3 000-255 Blue intensity
CH4 000-255
leds 4 to 6
Red intensity
CH5 000-255 Green intensity
CH6 000-255 Blue intensity
CH7 000-255
leds 7 to 9
Red intensity
CH8 000-255 Green intensity
CH9 000-255 Blue intensity
CH10 000-255
leds 10 to 12
Red intensity
CH11 000-255 Green intensity
CH12 000-255 Blue intensity
CH13 000-255
leds 13 to 15
Red intensity
CH14 000-255 Green intensity
CH15 000-255 Blue intensity
CH16 000-255
leds 16 to 18
Red intensity
CH17 000-255 Green intensity
CH18 000-255 Blue intensity
CH19 000-255
leds 19 to 21
Red intensity
CH20 000-255 Green intensity
CH21 000-255 Blue intensity
CH22 000-255
leds 22 to 24
Red intensity
CH23 000-255 Green intensity
CH24 000-255 Blue intensity
- It is possible to cascade several devices to be managed together (if they are in the same DMX address)
or separately (if they are in different DMX addresses).
Use an XLR cable to connect the device's DMX IN to the DMX OUT of the DMX controller when the device
is the first element in the chain. Alternatively, connect to the DMX OUT of the preceding element in the
lighting chain of your installation.
You can also supply power from one light to the next in the chain in the same way as shown in the picture
(POWER IN - POWER OUT).
LED BAR 24 x 3 W
BAR-73L
POWER OUT
4 A MAX.
DMX OUT DMX IN
GND
POWER IN
MODE SET
~110-240 V AC. 50/60 Hz FUSE: 5 A
POWER CONSUMPTION: 60 W
CAUTION : SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LED BAR 24 x 3 W
BAR-73L
POWER OUT
4 A MAX.
DMX OUT DMX IN
GND
POWER IN
MODE SET
~110-240 V AC. 50/60 Hz FUSE: 5 A
POWER CONSUMPTION: 60 W
CAUTION : SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DMX OUT DMX IN POWER IN
POWER IN POWER OUT
POWER OUT
DMX IN DMX OUT
DMX IN
DMX CONTROLLER
LED BAR 24 x 3 W
BAR-73L
POWER OUT
4 A MAX.
DMX OUT DMX IN
GND
POWER IN
MODE SET
~110-240 V AC. 50/60 Hz FUSE: 5 A
POWER CONSUMPTION: 60 W
CAUTION : SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To interconnect them, you must use XLR cables with the following configuration:
1 2
3
Masa
XLR macho (vista pines)
Señal +
Señal -
1 2
3
Massa
XLR macho (vista pinos)
Sinal +
Sinal -
1 2
3
Ground
Male XLR (pin view)
Signal -
1 2
3
Masse
XLR mâle (vue broches)
Signal -
ES
PT
EN
FR