24
Instructions for the user
1.12 Failures that cannot be reset
The display shows the failure based on the corresponding error code (see
Troubleshooting
on page
86
).
Some failures can be reset through the
key, while some others are self-resettable (refer to the following
paragraph).
If failures cannot be reset but are of the self-resettable type, no key will be enabled and only the LCD backlighting
will be on.
As soon as the error cause is eliminated, the failure signal will disappear from the interface.
The interface is enabled and after 15 seconds is disabled, unless a button is pressed.
1.13 Resume boiler function
The display shows the failure based on the corresponding error code (see
Troubleshooting
on page
86
).
Some failures can be reset through the
key, while some others are self-resettable.
If shut-downs can be reset (E01, E02, E03, E40, E80, E86, E87), the reset key and the LCD backlighting will always be
on.
The only active key you can press is the
key.
When the reset key is pressed and boiler is under the correct conditions, the error is reset. The failure signal will
disappear from the interface.
The interface is enabled and after 15 seconds is disabled, unless a button is pressed.
