2.1 PIERCING THE WALL
Cut the wall as necessary to fit the wooden frame. The outer dimension of the wooden frame is 514 mm long by
374 mm high. Be careful to leave at least 10 cm room below the ceiling, both in the cellar and outside.
2.2 SEALING AND LEVELLING THE WOODEN FRAME
Seal the wooden frame so that it is flush with the inside of the cellar wall. If
the wall is thicker than the wooden frame, cut a wedge-shape in the wall, as
shown in the diagram above.
The joint between the wooden frame and the insulation must be filled (with
polyurethane foam, for example), to ensure continuity of insulation.
WARNING, DO NOT PUT POLYURETHANE FOAM BETWEEN THE
WINEMASTER AND THE WOODEN FRAME, THE WINEMASTER MUST
BE REMOVABLE.
The wooden frame must be level :
the widest side should be horizontal
CORRECT INCORRECT
2.3
INSTALLING THE AIR-CONDITIONER
2.3.1 REMOVE THE PLASTIC COVER
Remove the cover
Unscrew the 2 screws on each side of the
Winemaster
WINEMASTER C18 / C18S(R) USER GUIDE
November 2002
Page 28
