9
2. INSTRUCTION FOR THE INSTALLER
CAUTION: the following procedure requires specific skills and adjustments while the flame is on
may cause damage to persons or things if not carried out with due skill and competence. The
modification of the appliance on part of unauthorized people, will invalidate any liability of the
manufacturer in case of malfunction and/or damage caused by the malfunction of the cooker.
The cooker comes with an LPG or methane gas predisposition (this is specified in the plate located
under Elios).
The appliance comes with the nozzle to be able to use the other gas.
You may request the nozzles for other types of gas.
2.1 LAWS, TECHNICAL REGULATIONS AND GUIDELINES
- Comply with all applicable regulations in your country.
- Standards for Accident Prevention
- you must always apply a cut-off valve between the appliance and the gas line.
2.2 FUME EXHAUST FOR "A" TYPE APPLIANCES
Elios is an A1 type appliance so it needs to be placed in a well ventilated area to prevent the
concentration of substances that are harmful to health.
The area can be ventilated naturally by means of permanent openings on the walls, such as doors,
windows (minimum opening of 100 cm
2
) or ventilation ducts (minimum opening of 150 cm
2
), or it
can be forced by using electric fans (minimum capacity 15,48 m
3
/h). Make sure that ventilation is
suitable and that it complies with all regulations in force.
2.3 INSTALLATION OF ELIOS
Use only the gas that is compatible with the cooker.
Place Elios no less than 20 cm from the walls.
- check that the gas line solenoid valve is shut.
- Connect the appliance to the gas system using rigid metal tubes or flexible stainless steel tubes in
accordance with applicable regulations.
If you use flexible tubes, check that they are not crushed or deformed.
Connect the gas to the hose connection (
point 4 figure 2.A
) supplied by means of a tube clamp (or
other method accepted by applicable laws)
checking the presence of the seal in the hose
connection
.
- With a solution of soap and water, check that there are no leaks. If there are leaks, you will be able
to see some bubbles.
- If the burner is powered with gas bottle and it has a variable flow regulator, the minimum
regulation must be set following the procedure of paragraph 2.4 under point 15.
CAUTION: never check for leaks with the use of fire!
