Service Manual
båÖäáëÜ
cê~å´~áë
5
1.1.2
Formats and symbols used
The formats and symbols used in this document have the following
meaning:
1.2
Safety
1.2.1
Basic safety information
1.2.1.1
Prerequisites
1.2.1.2
Modifications to the product
Modifications to this product which might affect the safety of the system
owner, patients or other persons are prohibited by law!
Prerequisite
1. First action step
2. Second action step
or
➢
Alternative action
Result
➢ Individual action step
Prompts you to do something.
Identifies a reference to another text
passage and specifies its page
number.
● List
Designates a list.
“Command / menu item”
Indicates commands, menu items or
quotations.
NOTICE
Important information on building installation
In order to prevent the risk of an electric shock, this unit must only be
connected to a supply mains with a ground wire.
The building installation must be performed by a qualified expert in
compliance with the national regulations.
NOTICE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTICE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
Summary of Contents for MyCrown Design
