fomex HD1000, User Manual

Page: 9 / 12

HD SERIES
Countermeasure on breakdown
9
Status Expected cause Point of checking and action
Slave is
impossible. Slave button is turned OFF. Check if slave button is turned ON.
Slave sensor is out of the light
of flash. After turning the lighting by 180° so as
for turning sensor to be shown, and than
operate it again.
Too strong light is on slave sensor. Block direct ray of light or bright light
from slave sensor.
Synchro Cord
doesn’t
become
tuned. Due to dust or other material on
synchro jack, it causes contact’s
defective. After checking synchro jack, remove
other material.
Synchro cord has defective contacts
and is disconnected. Replace synchro cord.
(Check if it can radiate by pressing
ready button.)
There’s no
reaction at all. Power supply is blocked. • Check if power cord is well connected.
• Check if the contact of socket is loose.
• Check if fuse is disconnected.
Others Contact our company or its seller.