4
How to use Controller
9
1
How to use buttons
*
Sequence of Mode Conversion
( Normal mode
→
QUICK mode
→
DMX address setting mode
→
Normal mode )
DETAIL
1
2
4
3
5
7
6
8
To Set LOCK Mode
:
2~3 seconds press ‘MODE ’ button once, on the LCD display window 'LOCK' displays and
is set. (Note : when ‘LOCK’ mode is set, CCT and DIM can’t be changed)
To Unlock
:
In ‘LOCK’ mode, when 2~3 seconds press ‘ADJUST ’ button once, ‘LOCK’ disappears from the LCD
display window and is released.
To Set QUICK Mode
:
Short-press ‘MODE’ button once, on the LCD display window ‘QUICK’ displays.
Press Q1
▲
button to 3200K or Q2
▼
button to 5600K (Default value). At this time, DIM and CCT can be adjusted.
How to adjust/set desired CCT value : In ‘QUICK’ mode, press ‘ADJUST’ button and CCT value is blinking. Please turn
CCT dial to select CCT value and press ‘ADJUST’ button to set.
Return to default condition : Press and hold Q1
▲
button and press Q2 button.
To Turn QUICK Mode Off
: In ‘QUICK’ mode, when press ‘MODE’ button once, ‘QUICK’ disappears from the LCD
display window. And ‘QUICK’ is released and transfer to DMX Address setting mode. (At this time, CCT is automati-
cally going back to the previous value used in normal mode.)
To Set DMX Address
: Press ‘MODE’ button twice, on the LCD display window ‘DMX’ appears and address is
blinking. At this time, set DMX address using Q1
▲
/Q2
▼
button. Please press ‘ADJUST’ button to save the address,
then it switches to normal mode. (Note : when it is connected with DMX console, DMX mode is automatically set
and the following is how to set DMX address. – Press ‘MODE’ button once. When address is blinking, please set the
address using Q1
▲
/Q2
▼
button and press ‘ADJUST’ button to save the address.)
Summary of Contents for flexible LED FL1200
Page 1: ...flexible LED FL1200 ...
