Fomei Digitalis Pro S600 DC, User Manual

Page: 3 / 12

3
For your safety
In order to prevent a fire or injury by electrical shock, always hold this product away from rain and moisture.
This product contains electronic components working under high voltage. Contact with the high voltage
circuit inside the product may cause an injury by electrical shock. Do not disassemble. In the event of repairs
being necessary, this product must be sent to an authorised service centre.
Stop using this product if it is damaged because of penetration, fall or strong impact and so remains
open. Otherwise there is a danger of coming into contact with the electronic parts inside and an injury by
electrical shock may result.
Do not point the flash directly into eyes at short distances (particularly with children). Otherwise this may result in eye
damage. When photographing children, keep the flash away from them at a distance of at least 1m (3.3 feet).
Do not use the flash when flammable gases, chemicals and other similar materials are present. Under
certain conditions these materials may be sensitive to the strong radiation created by the flash and this could
lead to a fire or electromagnetic interference.
Do not leave or store the flash in places where the ambient temperature exceeds 50°C (e.g. inside
a vehicle). Otherwise this may result in damage to its electronic parts.
The basic cordless Strobo flash kit includes:
Body of the flash
(without an RF
receiver)
Battery charger Battery
Li-Ion 11.1 V
Glass discharge
lamp cover with
a thread
Plastic
discharge
lamp cover
Note: Do not leave the battery in a discharged state for an extended period of time.
Optional accessories:
RF transmitter TR-22
16 channels
6 groups
RF receiver TR-22
16 channels
6 groups
HSS transmitter
1/8000s
HSS receiver
1/8000s
Launcher for cordless flash triggering comes in two models. TR-22 and HSS. Both models work at the radio
frequency of 2.4 GHz. The TR-22 model has the additional feature of a remotely controlled flash intensity
output directly from the transmitter and the option of remotely turning the device on/off.