H300 Temperature Humidity Chamber
Page 10
•
Press both the Up and down
keys for 6 seconds, until the temperature controller show:
Note that the controller will first show
continue to hold the Up
and down
keys until
is displayed.
•
Press the Up
key twice. The controller should show
•
Press the Advance Key
once. The controller will show
or
•
Change the units using the Up
or Down
keys.
•
Press the Infinity Key
twice when done.
Changing the Set Point
To change the target set point, use the Up
or Down
keys until the desired set point is reached. The
controller has a 3 second delay before a new set point becomes active.
Turning Temperature or Humidity Control OFF
To turn control off to both temperature and humidity, use the
CONT
button on the chamber Controls. You
can also turn off control to either temperature or humidity individually using the appropriate PM controller,
as follows:
•
Press the Advance Key
once. The controller will show
•
Press the Up
or Down
keys until the controller shows
