background image

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and 
outstanding after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask that 
you take a moment to review this manual before beginning the installation of the dispenser. Should you have any 
questions or require technical help at any point, please call our technical service group, (877) 612-5806 or  
+1 (610) 252-7301.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If 
damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing 
of a claim, if necessary.
Check your paperwork to determine which model you have. Follett model numbers are designed to provide 
information about the type and capacity of Follett ice dispensing equipment. Following is an explanation of the 
different model numbers in the VU300 series.

 

 

Important cautions

Storage area of dispenser contains mechanical, moving parts. Keep hands and arms clear of 
this area at all times. If access to this area is required, power to unit must be  
disconnected first.
Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
Always disconnect power before cleaning or servicing the dispenser.
Failure to remove all sanitizer may result in health hazard.
Follett manual load dispensers can accommodate most cube/cubelet ices up to 1" square, or Follett 
compressed nugget ice. Crushed, flake, bagged, nugget or congealed ice cannot be used. Use of 
these ices can jam dispenser and void warranty. Separate any “waffle-like” sections of cubes before 
adding to dispenser. For ice compatibility questions, please call Follett customer service at  
(877) 612-5806 or +1 (610) 252-7301.

!

4

VU300B8LP

Model series

Beverage cooling

B – Integral beverage cooling
M – No beverage cooling

Tower side (facing unit)

L – Left hand side
R – Right hand side
D – Dual-sided

Ice and valve actuation

P – Pushbutton
L – Lever

Number of valves

8, 10,12 or 20 or 24

Summary of Contents for VU300

























Reviews: