Specifi cations
Electrical
1.
Models with RIDE icemakers (C/E110CR400A/W)
Icemaker
Dispenser
220V/60Hz/1 phase
5 amps
1.5 amps
230V/50Hz/1 phase
5 amps
1.5 amps
2.
Freestanding models and models with integral icemakers (C/E110FB400A/W, C/E110CT400A/W)
Total
system
220V/60Hz/1 phase
6.5 amps
230V/50Hz/1 phase
6.5 amps
3.
Dispensers and RIDE icemakers are supplied with 7-foot power cord
Ambient
Air temp
38°C/100° F max.
10°C/50°F min. (best performance below 27˚C/80˚F)
Water temp
32°C/90°F max.
4°C min./40°F (best performance below 21˚C/70˚F)
Water pressure
70 P.S.I. max.
10 P.S.I. min.
Plumbing
110CR with
110CT with
110FB with
RIDE icemaker
integral icemaker
icemaker in base
Dispenser drain
3/4" FPT
3/4" FPT
3/4" FPT
Icemaker drain
3/4" MPT
3/4" MPT
3/4" MPT
Dispenser water inlet
3/8" FPT
3/8" FPT
3/8" FPT
Icemaker water inlet
–
3/8" FPT
–
RIDE IM water inlet
3/8" OD push-in
–
–
Cond. inlet – w/c only
3/8" FPT
3/8" FPT
3/8" FPT
Cond. drain – w/c only
3/8" FPT
3/8" FPT
3/8" FPT
Note:
Water shut-off recommended within 10 feet (3m) of dispenser. Drain to be hard piped and insulated, and maintain
slope of at least 1/4" per foot (6mm per 305mm run) of slope. All plumbing connections must be made in accordance with
local building codes.
Ventilation clearances
Countertop models with RIDE icemaker (C/E110CR400A/W) – none. 775mm (12") at top advised for service.
Countertop models with integral icemaker (C/E110CT400A/W) – 153mm (6") at top. 153mm (6") each side advised
for service.
Freestanding models (C/E110FB400A/W) – 102mm (4") at rear. 305mm (12") at top advised for service.
4
