6
self-contained
DROP-IN • SATELLITE-FILL
12"
(304,8mm)
min.
4"
(101,6mm)
➌
➍
➓
➑
➋
➏
➎
➊
➐
➐
Hot Water
➒
Prepare the dispenser.
3
Dispenser preparation
• Determine best route for ice transport tube run.
Note:
12" (304,8mm) clearance is required.
• Drill 1 3/4" (44,5mm) hole through either side of dispenser
➊
• Install gasket
➋
onto bulkhead fitting
➌
• Attach bulkhead fitting with flat up
➍
and tighten bulkhead nut
➎
• Position and secure nut locking plate
➏
with supplied screws
• Verify installation of O-ring on stainless steel ice transport tube coupling
➐
• Insert stainless steel ice transport tube coupling
➐
into bulkhead fitting and secure with
coupling cap
➑
• Soften ice transport tube with hot water (160 F (71 C)) to ease assembly
➒
• Attach ice transport tube to coupling with supplied hose clamp
➓
2.1
Dispenser preparation
3.1
