3
Form# 7040
Remote 1650 series ice machine
Specification
W1
Width
36.25" (92.0 cm) – all models
D1
Depth
25.50" (64.8 cm) – all models
H1
Height
26.10" (66.3 cm) – all models
Electrical single phase
208‑230/60/1
Electrical three phase
208‑230/60/3
Minimum circuit ampacity
single phase 29.90 A
three phase 21.24 A
Minimum overcurrent protection
single phase 50 A
three phase 35 A
Electrical
208‑230 V/60/3 ‑ three phase
35 amps, requires dedicated
amp circuit, internal connection
Cooling unit operating limits
(air temperature)
min ‑20 F (‑29 C)
max 120 F (49 C)
Maximum refrigerant line run length
100' (30.5 m)
Maximum line rise above evaporator
35' (10.7 m)
Evaporator mounting above condenser
15' (4.6 m)
Maximum refrigeration line drop
15' (4.6 m)
BTU/hr (Kcal/hr) at
0 F (‑18 C) evaporator, 90 F (32 C) ambient air, 1650N units only)
13,000 (3,276)
Rack systems * EPR valve ‑ set to
0 F (‑18 C)
Approximate ship weight
340 lb (154 kg)
NOTE:
1. 1650 model condensing units have a liquid suction line heat exchanger. The entire liquid line should be insulated separately from
the suction line.
2. Outdoor installation of low side is not recommended and will void warranty.
* EPR valve to be supplied by installer.
W1
D1
H1
Dimensional drawing
