4
FZR Undercounter Freezer
Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Installing Legs – Required
1. Remove legs from plastic bag packed inside freezer.
2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs
will extend 1/8” (3.175mm) below base of freezer.
3. Adjust legs as needed to level freezer in both directions. To access
legs, remove the lower front panel. Turn legs clockwise to extend
legs.
Fig. 1
Installation Shelves – Required
1. Remove shelves and shelf brackets packed inside freezer.
2. Install shelf brackets in pilasters. Insert top tab, squeeze and push
in lower tab
(Fig. 2).
Fig. 2
2
1
3
Changing Temperature Controller Settings – Optional
Follett’s temperature controller is pre-programmed with a -25 C (-13 F)
set point and degrees C display. The -25 C (-13 F) set point delivers a
temperature range of -23 to -25 C (-9 to -13 F).
Follett’s controller set point can be changed to deliver up to a -15 C (+5 F)
temperature for applications where a lower temperature is not desired (i.e.,
ice cream). See
Controller Operation on page 7
to change controller settings.
Fig. 3
