09
.ELECTRICAL CONNECTION
_
Before fixing the panel, connect the power supply cable to the panel cable in a
suitable and consonant manner.
Make sure to disconnect the power supply, connect the cable of the LED
to the driver as shown in step b. Connecting the red cable of the
LED with the red cable of the driver and the black cable of the LED
to the black cable of the driver. Subsequently connect the driver to the
electrical system with the 110 V cable and power the system.
Use class II transformers with adequate absorption with regards to the
consumption of the FOLIO® panel, with an exit current of 24V and with
SELV exits EN 61347-2-13 compliant. It is recommended to connect maxi-
mum 4/5 Folio panels to one driver.
Dimmable:
PWM - DALI - DMX
DIMMING
RED
BLACK