Base
Picture showing
real-time
base station
setup
Choose a suitable place for your base station setting up.
1) The place for base station setting up should be wide opened and easy to receive the
2) Higher place would be better for setting up, thus signal of UHF is easy to receive. If
is far from base, then the enhanced antenna should be raised by using bipod.
signal of satellites.
3) Base should be far away from the high power WiFi objects,e.g. radio,
MWS etc. Distance between them needs to be more than 200m. And
less than 50m from power lines is also forbidden to set up base.
Process:
1. Set up the tripod mount and level the tribrach onto the tripod.
2. Check that the tribrach is correctly centred over the marker.
3. Place and lock the receiver on the tribrach.
4. Check that the tribrach is still correctly positioned and leveled.
5. Choose external radio module from FOIF Survey_GPS software.
6. Fix the radio beside tripod, using cable FG-DB9-M to do the
*
7. Fix enhanced UHF antenna.
connection work between radio and receiver.
A20 User Manual
3 Setting Up Receivers
3.1 Base Station
6
rover
