10
This clamp connection can be used to power a second, passive
Hybrid-1
.
(5) Mains
This is where you connect to mains power using an IEC cable (C14).
(6) Cable strain relief
You can reduce the tension on the cable by using a cable tie or other connector on this metal tab.
Hybrid-1
passive has the following connections and displays on the rear of the enclosure:
Cables should only be connected when the system is shut off.
(1) Input from amplifier
This clamping connection allows you to supply the passive
Hybrid-1
.
3.2 Configuration and Monitoring
Once you have made the relevant connections described in
3.1
,
Hybrid-1
is ready to use. However, if
you would like to change configurations such as routing, EQ or levels, or if you would like to load a new
preset or monitor
Hybrid-1
using software, connect it via the USB-C port to a control computer. To do
this, you will need a Windows computer with the installed control software,
Fohhn Audio Soft (free
download at www.Fohhn.com)
.
1
1
