DB0074 05/16
SYSTEM INSTALLATION AND SET-UP
• To reduce risk of injury, extreme care should be taken when operat-
ing the systems near children.
• Make sure that the systems are firmly secured, especially when used
with tripod stands. Avoid sloping or unstable surfaces at all times.
• Do not use the systems near water (e.g. sinks, swimming pools, or on
wet ground).
• Keep the systems free from moisture, dust, lengthy or intensive expo-
sure to sunlight and vibration.
• The systems should not be used near ovens, heaters or other
heat-producing equipment, nor should they be exposed to extremely
low temperatures.
• The systems should be installed in such a way that optimum ventila-
tion is guaranteed and power outlets are within easy reach.
• Make sure that the systems cannot be tampered with, or fall over,
and that no liquids can get into the ventilation slots thus damaging
internal components.
• Containers with liquid (i.e. glasses) should never be placed on top of
the systems.
OPERATION
• Never go below the minimal load impedance of the connected am-
plifier.
• When used in conjunction with headphones or an external amplifier,
these systems can produce volume levels that may potentially dam-
age your hearing. Do not listen at high volume levels for long periods.
If you notice any deterioration in your hearing, or whistling in your
ears, please consult your doctor.
• While in use, loudspeakers can be damaged through:
1. feedback from microphones
2. continuous high level, high frequency signals from electronic mu-
sical instruments
3. distorted, high level signals
4. popping noises that can occur if a device in the set-up is switched
on, connected or disconnected while the amplifier is on
IMPORTANT SAFETY INFORMATION
Please read the following safety information carefully before using the system. This information should be kept handy for
future reference. Reading this manual does not replace the need for awareness and observation of all current local safety
regulations, legal requirements and compliance with safe working methods at the venue.
The following information and technical specifications have been based on data that was available at the time of publica-
tion. We expressly reserve the right to make changes as necessary.
SAFETY INFORMATION
| ENGLISH
CONNECTION AND CABLING
• Cabling provides the vital link between all the components in an au-
dio installation, from microphones and instruments to loudspeakers.
Their function is often underestimated!
• Please ensure that your cabling functions faultlessly.
• When buying cables, please choose tread-resistant cabling with
good quality connectors. If required, we can supply appropriate
cabling for your loudspeakers.
• Make sure that the distribution for the mains voltage is intact.
• Using isolated or inadequately earthed distributors or power cables
is forbidden!
• Care should also be taken when laying cables: For example, an un-
balanced cable should not be placed next to a lighting cable, but if
necessary it can be laid at right angles in order to minimize the risk of
interference.
• All cables should be firmly fixed to the floor using gaffer tape.
•
WARNING:
No objects should be placed on the system’s power ca-
ble. Only use intact power cables!
• The system must only be connected to a mains voltage supply that is
compatible with the system itself.
• The power cable should be removed if the system is not going to be
used for a while. Remove holding the plug, not the actual cable.
SERVICE UND GUARANTEE
The system should be referred to a qualified service engineer immedi-
ately if:
• The power cable or connector is damaged.
• A foreign body or liquid has gone into the system interior.
• The system has been exposed to rain.
• The system is not working as normal, for instance if significant
changes in performance are noticeable.
• The system has fallen over, or the housing is damaged.
Do not perform any kind of servicing on the system outside of normal
daily maintenance. Any additional servicing must be carried out by suit-
ably qualified service personnel.
Keep all packaging in case the system needs to be returned for whatever
reason. Using the original packaging will minimize any potential risk of
damage during transportation.
COMPLIANCE WITH SAFETY PROVISIONS AGAINST FIRE HAZARD, RISK OF ELECTRONIC SHOCK AND INJURY TO
PERSONNEL
WARNING
WHILE LINEA FOCUS SYSTEMS ARE IN OPERATION, THE FOLLOWING SAFETY REQUIREMENTS MUST BE STRICT-
LY ADHERED TO:
