8
Secure the mesh sides
Step 1
The sleeves for the wooden dowels at each end of the mesh sides
should have been pulled through the mesh slots in the bed end in the
previous step. Insert the dowel into the sleeve to lock it in place (Fig.1).
Use a tool such as one of the dowels or a wooden spoon handle to push
the dowel home.
If necessary, use a hammer or mallet and tap lightly. The dowel should
nest snugly in the coving (See Fig.2 for an illustration of the coving) and
the mesh should be appropriately tensioned across the cot side.
C
Step 2
Place the mattress on the bed base inside the cot.
Step 3
Check all bolts for tension and tighten if neccessary. Do not over tighten.
Your cot is now fully assembled and ready for use!
Figure 1
Figure 2
Coving
Summary of Contents for Mo
Page 1: ...Assembly Guide Mo...