- 9 -
MODEL: FC-SCORP6.1
Instruction Manual
OPERATION
MODEL: FC-SCORP6.1
1. PREPARATION
A gas cylinder and suitable gas pressure regulators are required for using the gas grill. The
regulators should comply with the standard EN16129 in its latest version as well as with
national regulations..
ENERGY SAVING TIPS:
a) Keep the time the lid is open to a minimum.
b) Turn off the grill as soon as cooking is completed.
c) Preheat the gas grill for 10 to 15 minutes only (except when using it for the first time).
d) Do not preheat the grill for longer than recommended.
e) Do not use a higher setting than necessary.
f) Connect the hose and regulator to the gas cylinder on the left side of the gas grill.
Always remember that the gas cylinder must be kept in a safe position and away from heat.
The hose should have a diameter of 8 to 10 mm. We recommend using a hose with a length
of no more than 1.5m.
2. INSTALLATION
After you have bought your gas cylinder, it needs to be set up with your gas grill.
• Check all parts and make sure that no part is missing. Please contact our customer services
if anything is missing.
• A suitable screwdriver and spanner are required for assembly. Make sure to only use tools
that are in good working order and suitable for the job.
Choose a suitable place to set up the appliance. It must be positioned firmly on a flat and
sufficiently sized surface. Make sure that you have the correct inlet and outlet regulators that
match both the cylinder valve and the appliance.
When used outdoors, please ensure that the regulator is protected against weather
influences. A spanner is required for connecting the gas cylinder.
When connecting the flexible tube, please make sure it is not twisted.
