- 12 -
MODEL: FC-SCORP4.1
Instruction Manual
If you cannot use automatic ignition, please remove the cooking grill and heat diffuser
(hotplate). Then turn the valve anticlockwise to 90° to light the flame using a barbecue
lighter held to the burner fire hole at a distance of 5 mm. Now replace the cooking grill and
heat diffuser (hotplate). Please wear fireproof and heat resistant gloves.
WARNING
If the burner still does not light, turn the burner control knob to “OFF” and wait for 5 minutes
to let the gas clear, before you make another attempt to light the gas grill.
STORAGE
Store your gas cylinder in a well-ventilated outdoor area, and disconnect the cylinder from
the gas grill whenever it is not in use. Ensure that you are outdoors and that there are no
sources of ignition nearby, before attempting to disconnect your gas cylinder from the grill.
Before using your gas grill after a period of storage, please make sure to check for any gas
leaks or any obstructions in the burner etc. Always follow the cleaning instructions to ensure
that your gas grill is safe to use.
If the gas grill is stored outdoors, please ensure that the area under the front panel is free
from any obstructions (dirt, insects, etc.) as this may affect the flow of gas.
• Store your grill in a cool and dry place. You may need to dry the gas grill and the inside of
the cover before use.
• Chrome plated warming racks etc. should be coated with cooking oil. Wrap the burners in
aluminium foil to help prevent insects or other debris from obstructing the burners.
CLEANING
We recommend that you service your gas grill every 90 days, however, it is absolutely
necessary that maintenance work is carried out at least once a year. By doing so, you will
extend the service life of your gas grill.
Your gas grill is very easy and convenient to clean, if you follow these useful hints.
a) Turn on the burner for 15 to 20 minutes. Any grease drippings on the grill and the hot
stone are burned off. Make sure that the appliance has cooled down before you continue.
b) The grids should be cleaned regularly by soaking and washing them in soapy water.
c) The inside surfaces of the grill body cover should also be washed with hot, soapy water.
Use a wire brush, steel wool, or a scouring pad to remove any stubborn dirt.
d) Check the burner regularly to ensure that it is free from insects or spiders that might clog
the gas system and obstruct the gas flow. Make sure to clean the venturi pipes of the
burner very carefully, ensuring that there are no blockages. We recommend using a pipe
cleaner for cleaning the venturi pipe area.
e) Any modifications of this appliance may be dangerous and are not permitted.
CONNECTING THE GAS CYLINDER
MODEL: FC-SCORP4.1
Maintenance
MODEL: FC-SCORP4.1
