Foerster 6.453, Operating Instructions Manual

Page: 60 / 67

SENSORSYSTEM Ro 130
5.5 Maintenance of the roller guides MAINTENANCE
5-8
6.453 – 01/2006
5.5.3 Removing the roller guide levers
Note!
The levers of the roller guide should be removed for replacement of the
track rollers or for thorough maintenance and care of the roller guide
Remove retaining plates (6)
Pull out bolts (5) of lever (4)
Remove fishplates (11)
Unscrew groove nut (8)
Remove washer (9), shim washer (10) (if present), O-ring (2) and thrust
washer (3)
Pull lever (4), thrust washer (3) and O-ring (2) off bearing pin (1)
Reassemble vice versa
Fig. 5.8 Removing the roller guide levers
1 Bearing pin 132 293
2 O-Ring 010 421 3
3 Thrust washer 017 781 4
4 Lever 1318128
5 Bolt 1318225
6 Retaining plate 1318276
7 Allen screw M 4x10 DIN 912
8 Groove nut M 18x1,5 DIN 1804
9 Washer 132 302 4
10 Shim washer 010 720 4
11 Fishplates 132 292 3