FODSPORTS FXBA Air, Manual

Page: 6 / 52

3.lnstallation & Disassembly
3.1 Speaker Installation
1. Open the inner lining of the helmet
ear position and fix the Velcro to the
ring position.
2. Fit the headset to the Velcro and fix
it to the ring position. (The short-line
speaker is on the left). 3. Stick the microphone and Velcro on
the left side of the helmet at a suitable
position, aim the microphone at the
mouth position, and arrange the wires
to the inner lining.
Remark: the microphone should be closed to and aim at the mouth as possible. The speakers are as close to ears
as possible. If installation position of the speaker is too deep so that the speaker is too far away from the ear, the
sponge in accessory may be used to jack up.
-4-