FODSPORTS BT-S3, User Manual

Page: 11 / 87

pair A-B, B-C,A-C.After pairing A and C successfully, press A's power button
once, that means A and C exit the intercom mode. At this time, A, B, and C
are in standby mode, B acts as a bridge. And then press A's power button
again, A Enter the intercom mode with B. Press A's power button twice, A
Enter the intercom mode with C. Press C's power button once, B and C
enter the intercom mode.
4. From Standby press the power/intercom button 1 time for one of the
pairings to be called, or 2 times for the other pairing to be called.
5. The pairing for 1 or 2 presses will depend on the sequence in which you
paired the 3 helmets, but once paired the relevant pairings will maintain
the number.
6. i.e. A will press the power/intercom button 1 time to call C and 2 times
to call B. B will press the button 1 time to call C and 2 times to call A. C
will press the button 1 time to call A and 2 times to call B.
About the second pairing
When you unintentionally turn off the intercom or need to use for a
second time, You can do as following
1. Turn on the two intercoms at the same time, then will see the blue lights
flashing.
2. Please wait 5-6 seconds after the blue lights flashing.
3. Then press the"power button" of any intercom, after 3-6 seconds, blue
lights on both devices flashing at the same time and remain alight. for
about 2-3 seconds, indicating successful pairing.
To Reset the Pairing Memory
1. If you have problems pairing, then it is best to reset the pairing memory
2. Turn on the relevant unit into standby mode. Press the power/intercom
button for 3-5 seconds till a "dudu" can be heard.
3. Let go of the button when the tone is heard.(The unit will turn off)
4. Restart, the memory will be erased. (Repair again)
10