12
Encoder Toggle Function
The Input Encoder can be programmed to toggle any one of the input
functions with a single push (ie., without having to enter the Config
Menu screen).
This can be very useful when, for example, experimenting with
microphone phasing.
To select a function for the Input Encoder toggle feature:
1
Enter the Config Menu screen
2
Scroll to the function required for the toggle feature
3
Press-and-hold the Input Encoder until the confirmation
message appears in the input display
The selected function will now toggle on/off* each time the Input
Encoder is clicked.
*If ‘Type’ was selected, clicking the Input Encoder will step through the available
inputs.
line Inputs 5 – 8
Line input channels 5 to 8 are always available on the input DB25 connector.
The gain of these channels is not variable.
An input signal level of +18 dBu corresponds to 0 dBFS.
+48V
Phase
HPF
Air
Link
Back
Line
On
Off
Type
Off
On
On
On
Off
Off
On
Off
Stored
Press Function
Phase
Input Encoder Toggle Confirmation
THIS EQUIPMENT MUST BE
EARTHED BY THE POWER CORD
WARNING
Focusrite
WORD
CLOCK
LOOP
SYNC
OPTICAL 9-16
OPTICAL 1-8
IN OUT
IN OUT
IN OUT
SPDIF
MONITOR OUTPUTS
PRIMARY PORT
LINE INPUTS 1-8
LINE OUTPUTS 3-10
MIC INPUTS
1
2
3
4
1
2
R
L
1
2
IN
OUT