background image

2

IMPORTANT SAFETY INSTRUCTIONS

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus with water.
6.  Clean only with dry cloth.
7.  Do  not  install  near  any  heat  sources  such  as  radiators,  heat  registers,  stoves,  or  other 

apparatus (including amplifiers) that produce heat.

8.  Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus.

9.  Only use attachments/accessories specified by the manufacturer.
10.  Use  only  with  the  cart,  stand,  tripod,  bracket,  or  table  specified  by  the  manufacturer,  or 

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

11.  Unplug this apparatus during lightning storms or when unused for long periods of time.
12.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus 

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has 

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain 

or moisture, does not operate normally, or has been dropped. 

13.  No naked flames, such as lighted candles, should be placed on the apparatus.

WARNING: Excessive sound pressure levels from earphones and headphones can cause hearing 

loss.

WARNING: This equipment must only be connected to USB 2.0 type ports.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within equilateral triangle, 
is intended to alert the user to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The  exclamation  point  within  an  equilateral  triangle  is  intended  to 
alert the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.

Summary of Contents for iTrack Solo


















Reviews: