background image

7

PERFORMANCE AND SPECIFICATIONS

Digital Performance

Supported sample rates

44.1 / 48 / 88.2 / 96 /176.4 / 192 kHz  (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources

Internal or from Word Clock

Connectivity

Dante

Primary & Secondary

Ethernet standard RJ45 connectors (Compatible with Cat 5e and above).

AES3

Channel Count

2 x AES3 Channels  

(ADN2)

8 x AES3 Channels  

(ADN8)

Output

1 x XLR-3 male  

(ADN2)

1 x DB25 female; AES59 Combined I/O / Tascam Digital  

(ADN8)

0 dBFS reference level

22 dBu

Frequency response

20 Hz – 20 kHz ± 0.1 dB

THD+N

-105 dB (0.0006%) unweighted, 20 Hz – 20 kHz; -1 dBFS input

Dynamic range

121 dB ‘A’-weighted (typical), 20 Hz – 20 kHz

ADAT

Channel count / Output

2 x ADAT Channels  

(ADN2)

8 x ADAT Channels  

(ADN8)

Output

1 x TOSLINK connector  

(ADN2)

2 x TOSLINK connectors  

(ADN8)

Channel assignments:

(ADN2:)

  44.1 / 48 kHz

 

88.2 / 96 kHz

 

176.4 / 192 kHz

(ADN8:)

  44.1 / 48 kHz

 

88.2 / 96 kHz

 

176.4 / 192 kHz

Port 1: Channels 1–2

SMUXI: Port 1: Channels 1–2

SMUXII: Port 1: Channels 1–2

Port 1: Channels 1–8 , Port 2: Channels 1–8

SMUXI: Port 1: Channels 1–4, Port 2: Channels 5–8

SMUXII: Port 1: Channels 1–2 , Port 2: Channels 3–4

S/PDIF

 

(ADN2 Only)

Channel count / Output

2 x S/PDIF channels  /  1 x RCA phono socket

Frequency response

20 Hz – 20 kHz ± 0.1 dB

THD+N

-105 dB (0.0006%) unweighted, 20 Hz – 20 kHz; -1 dBFS input

Dynamic range

121 dB ‘A’-weighted (typical), 20 Hz – 20 kHz

Word Clock

Input

1 x BNC 75Ω port

Output

1 x BNC 75Ω port

Summary of Contents for ISA ADN2









Reviews: