TView Micro XGA User’s Guide
Chapter 2
11
Inspecting the Equipment
Before installing and connecting the hardware, inspect it for any
damage, which may have been incurred during shipment. Perform a
thorough inspection, looking for dents, scratches, or loose parts.
Look for anything that appears unusual or out-of-the ordinary. If any
of the equipment is damaged, contact FOCUS Enhancement’s
Customer Service department by calling 1-800-338-3348.
Connecting the TView Micro XGA to an
IBM PC or Macintosh Computer
This section describes the steps to connect your TView Micro XGA to
a television or VCR. The following sections describe how to connect
to IBM PCs, Macintosh PCs, IBM PC laptops and Notebooks, and
Macintosh PowerBooks.
Notes: 1. Before performing the steps to connect the TView
Micro XGA to a laptop computer, you must turn on the
external video connector. This is accomplished by using
a particular key sequence on the keyboard (for example,
FN + F11) or through the BIOS setup program. Refer to
your laptop owner's manual to determine how the
external video connector is turned on.
2. Ensure that you are using a Macintosh PowerBook
computer that has a connector for an external monitor.
