Focus RM-518 plus, User Manual, Page: 6 / 29

Start the Remote control set up:
1 Prepare:
1.1 Turn on the power of computer, and plug USB receiver into USB port of your
computer.
1.2 Open the battery cover under the remote and place 2 AA batteries inside the
battery compartment.
2 Set ID:
2.1 Press the ID button on Receiver, the LED will be flashing; which means receiver
is sourcing ID.
2.2 Continuously, Press the ID button on the back of remote, the LED on receiver will
be off, which means the setting is successful.
ID Button
LED light
- 5 -