Remote Setting:
1. RF Signal LED on the receiver will flash when the keyboard or remote
is being used. (Picture A)
2. When Battery Low LED lights, it means the keyboard or Remote
requires changing batteries. (Picture B C)
Page:
5
Remarks
Open the battery cover.
Press ID button on the receiver, the LED is on flash which means
ID is searching. (Picture A)
Press ID button on the back of remote, the LED on the receiver is
off which means setting is successful. (Picture B)
b.
c.
a.
Receiver(A)
Keyboard(B)
Remote(C)
(Picture B)
(Picture A)
