Chapter 2
Hardware Installation
NOTE: Make sure the power is off ,and the power cord removed from your
PC before installing or removing any equipment
1.
Remove the CPU case cover
2.
Remove the metal expansion slot cover from the desired PCI slot and save
the bracket-retaining screw.
3.
To install the TV Card in the PCI slot, hold the card with the mounting bracket
facing the rear of the computer. Position the Edge Connectors above the
PCI slot connector. Firmly but carefully insert the TV Card using a gentle
rocking motion to make sure that the card is seated firmly and is level front-
to-back.
4.
Use the bracket retaining screw from the slot cover to hold the newly-
installed card in place
5.
Replace the CPU case cover
6.
Plug FM Antenna into the connector on the rear of the card. (refer to the
diagram above for the location of the FM connector)
7.
Plug TV / Cable connection into the connector on the rear of the card. (refer
