Focus Firestore FS-M User Manual Download Page 15

Page: 15 / 79

Getting Started

FS-M User Manual - Review Draft

MANL-0977-01

1.2 Getting Started

1.2.1 System Requirements

To operate the FS-M, the following items are required:

• A composite video or s-video source.
• A video monitor with a video or s-video input.
• A set of video and audio cables.
• An AC power outlet.

Before powering on the FS-M, please take a few minutes to become familiar with
the FS-M front panel control interface and its back panel connections.

1.2.2 Unpacking the FS-M

Unpack the FS-M and verify that all components are present and not damaged.

The standard FS-M system includes:

Missing or Damaged Components

If there are missing or damaged items, contact Focus Enhancements Support for

assistance.
Email: [email protected]

Telephone: 763-398-1658

Hard Drive Lock Keys

(Drive bay must be locked
for FS-M to operate.

FS-M CD

Rack Mounting Tabs

(with 8 screws)

Ethernet Crossover Cable

Universal Power Cord

FS-M MPEG Digital Disc Recorder

FS-M User Manual

Summary of Contents for Firestore FS-M
















































































Search results

Summary of Contents for Firestore FS-M

Reviews:

Brands by name

Popular brands

Focus Firestore FS-M, User Manual

Search results

Summary of Contents for Firestore FS-M

Reviews:

Brands by name

Popular brands