Focon Showtechnic Expolite led22385, User Manual

Page: 29 / 36

E-29
Activate Password Protection
In the menu KEY the password protection of the fixture is activated or deactivated. If set ON the
fixture is password protected when started. 30 seconds after the last setting the menu is locked
again. To be able to make changes in the menu the password
UP - DOWN - UP - DOWN - ENTER
needs to be typed in.
MENU
MENU
Calibration and Whiteadjustment
To reset the changes made to the colour temperature presets to factory default, the setting
CAL needs to be confirmed with the default password UP - DOWN - UP - DOWN -
ENTER.
In the menu WT the preset colour temperatures for the white values are stored. These are mixed
from the parameters Red ( R. ), Green ( G. ), Blue ( B. ) and White ( W. )
In the menu RGBW a custom colour calibration is stored which limits the maximum
brightness of the colour channels at the DMX value "255".
NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
PERSON HSIC KEY ON
HSIC OFF
PERSON HSIC CAL
****
WT WH.01
R.(0 - 255)
G.(0 - 255)
B.(0 - 255)
WH.11
o
o
o
RGBW
R.(0 - 255)
W.(0 - 255)
G.(0 - 255)
B.(0 - 255)
PERSON
HSIC ZOOM
POS1
HSIC POS2
0 - 255
0 - 255
Set Zoomrange for DMX-Control
MENU
In the zoom-menu the starting ( POS1 ) and ending position ( POS2 ) of the motorised zoom controlled
via DMX can be set, limited by the zoom settings made in the menu Miscellaneous Settings .
Current Software Version
When the software of the fixture is booting, the current installed software version is shown for about 5
seconds in the display.