F82
1593
7
With a pencil mark out the desired height where you would like the mirror brackets(I) to be situated on the rear of the legs.
To avoid splitting the leg, pre drill the bracket holes with a 2mm drill bit, Now attach the brackets to the legs using the
3x12mm screws (G). Once the brackets are in position, centre and level the hearth into its final fitting position, mark with a
pencil on the wall where you wish to drill. Remove the surround and prepare the wall from the marked positions. If using the
fixings supplied, drill a hole in the wall using a 6mm drill bit, if not, use a suitable drill bit for the wall plugs you are using.
Insert the wall plugs (H) into position. Offering the surround back up into position against the wall, you are now able to
secure the surround to the wall using the 4x30mm screws (F).
