The hood should be lifted and pulled outwards to disengage, then remove the door by removing the four
screws and lifting away. The glass can be cleaned with a suitable glass cleaner.
FIREFRONT - Any dust accumulating in the fire front may be removed using a vacuum cleaner or dry cloth.
Heavy stains may be removed by using a damp cloth and mild household detergent. Brass parts
of the fire front may be cleaned using a suitable brass cleaner. Replace the front centrally
against the fire after cleaning.
PAINTED AREAS - These can be cleaned using a dry cloth.
COALS A
AND C
CERAMICS
See the relevant section in the Installation Guide of these instructions. Clean coals gently in open air. Do not
create dust from the coals. If using a vacuum cleaner, a HEPA filter system is recommended.
SERVICING
The fire and flue should be checked on an annual basis to it is working safely and that there is no excessive
build up of soot. The frequency of service will depend on usage, but MUST be carried out at least once annu-
ally. Servicing must be carried out by a competent person, such as a CORGI registered installer.
Cleaning of the coals may be carried out by following the instructions given in the Installation section. The
Installation instructions carry full servicing details for the use of the installer.
LIST O
OF SSPARE PPARTS
PA
ART N
NO.
ITEM
??????????
Pack of 14 coals
??????????
Ceramic combustion matrix
??????????
Ceramic side cheeks
??????????
Ceramic brick panel
Please enquire
Decorative frame
Please enquire
Decorative fret
??????????
Glass door assembly
Please enquire
Hood
??????????
Pilot assembly
??????????
Gas valve
??????????
Burner tray
??????????
Pilot Gasket
??????????
Gas pipe gasket
??????????
Front panel gasket
?????????
Outer tray gasket
1.0
1.0
1.0
1.0
