Foaus HOME GYM-4700, Manual

Page: 6 / 13

1) Place the rubber feet (13) on the ends of the central, back and front stabilising bases
(2).
2) Attach the front and back stabilising bases (2) to the main base (3), Front plat form
58) and the Stabilizer base (76) using screws (1a) or (1b), washers (2a) and nuts (3a).
Then Attach the stabilizer base (76) to the main base (3) using screws (1b) washers
(2a) and nuts (3a), Note:and this time screws(1b) must be attached from up to down.
3) Attach the push up bar (right) (67) and the push up bar (left) (68) to the stabilizer base
(76) using screws (la) washers (2a) and nuts (3a)
4) Attach the vertical support (6) and the plate (64) to the main base (3) using screws
(1a), washers(2a) and nuts (3a).Attach the cushing support Frame (75) and the plate
(64) to the stabilizer base(76)using screws (la) washers (2a) and nuts (3a)
5) Insert the chrome bars (11) putting previously one of the weight cover support (59)
together with the cylindrical rubber stops (39) on the main base (3) as shown in the
drawing, and screw the bars to the base (3) using screws (1I), washers (2e) and nuts
(4a). Slide each weight (18) along the bars(11) (sticking on the weight labels).
IMPORTAND NOTE : The groove for the weight selector pin (33)should be facing
downwards. If not, the pin will not slide across.
6) Slide the weight selector (16) through the hole in the center of the weights (18).
7) Pass the socket (46) through the weight selector (16) and join blth parts to the pin (40).
Pass the upper weight (15) through the bars and position the socket (46) in such a
way that it fits in the base of the upper weight (15). Place the upper weight washer (48)
over the hole in the center of the upper weight (15).
5
PDF created with pdfFactory Pro trial version www.pdffactory.com