Page 2 of 6 | 05182015
User Manual: Portable Mist Units | English
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Model No.: MU-10N-3, MU-10NK-3, MU-10NV-3
WARNING
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine
components, and hazardous fluids in an environmentally safe
way according to local waste disposal regulations.
Always remember to recycle.
Specifications and parts are subject to change without notice.
Specifications:
Mist mast height range: .................. 3.5 to 8.5 ft
(1 m to 2.6 m) approximately
Liquid Temperature ....................... 40˚F to 100˚F (4.4˚C to 37˚C)
Droplet size: ................................. 20 microns at 50 psi
1 liter of solution will cover approximately 1000 cubic feet (up to
system max of 38,000 cubic feet).*
A full tank of solution will supply the unit for approximately 1
hour.*
*NOTE: Area covered and run time may vary based on humidity,
air flow, and product used
Dimensions and Weight:
Length: ....................................... 21 in (534 mm) approximately
Width: ........................................ 20 in (508 mm) approximately
Height: ....................................... 47 in (1194 mm) approximately
Weight (empty): ......................... 42 lbs (19 kg ) approximately
Requirements:
Air pressure required: 50 psi (3.4 bar)
Air volume required: 9 CFM at 50 psi (254.9 l/min at 3.4 bar)
Chemical Requirements: Follow all instructions from chemical
manufacturer and Safety Data Sheet (SDS).
Air Operated Double Diaphragm Pump Models Offered:
P56: Polypropylene body with Santoprene diaphragm
P56V: Polypropylene body with Viton diaphragm
P56K: Polypropylene body with Kalrez diaphragm
Read this manual completely and understand the
machine before operating or servicing it.
• Read all instructions before installing or operating unit.
• Always wear appropriate personal protective equipment
(PPE) when operating or servicing unit.
• Follow all chemical safety precautions and handling
instructions provided by the chemical manufacturer and
Safety Data Sheet (SDS).
• Do not exceed an incoming air pressure of 100 psi (7
bar).
• Do not exceed a fluid temperature of 100˚F (37˚C).
• Only use clean and dry air. Air must be filtered and free
of moisture or pump life will be diminished. If needed,
install an air dryer before unit.
• Do not use air lubricator before the unit.
